Bagasse is the residue of sugarcane after the juice extraction process. with the increase in sugarcane plantation due to the demands of sugar milling industry, bagasse is also produced in large quantity. rather than allowing this large amount of bagasse to go to waste, it is more rational to make good use of this material. the potential of bagasse is used as bio-composites reinforcement material. this is done by analyzing the mechanical properties of the composite. to obtain the mechanical properties data of the composite, three mechanical tests were carried out in accordance with standards. the project consists of method to fabricate bagasse particle reinforced bio composite by using hand lay-up process. extraction of sugarcane fibers from sugarcane by chemical treatments. the mechanical properties data of the composite are obtained by testing the composite samples over the mechanical testing apparatus and analyzing the properties of the composite. comparison of mechanical properties of the bagasse particle reinforced bio-composite with the mechanical properties of the glass fiber reinforced composite. the seven basic tools of quality is a designation given to a fixed set of graphical techniques identified as being most helpful in troubleshooting issues related to quality. they can be used to solve the vast majority of quality-related issues. this quality tools are applied to improve the quality as well as the mechanical properties of the bagasse particle reinforced bio-composite.